YAMAHA APE HANGERS CHROME 1.5 FLYING APES BY CARLINI

RISERS OR JUST BUY OUR 1.50 INCH RISERS FOR THE HANDLEBARS

HEIGHTS FROM 14S TO 20S , JUST LET US KNOW WHAT YOU WANT .

YAMAHA RIDERS JUST DRILL YOUR RISER BOLT HOLES SLIGHTLY LARGER AND USE THESE 1.5 RISER AND THESE.1.5 HANDLEBARS USE GRADE 8 , 1/2 INCH RISER BOLTS .....

The Apes features a new, more aggressive, bend in the uprights. Ape with its sharp corners this bar has more attitude than any other bar in our lineup..

Now in 1.50" diameter, these bars will require a 1.50" diameter riser please see our Risers.

These bars are also equipped for Electronic throttle and drilled for internal wiring. .

Grip sections are 1.00" in diameter (will fit stock harley controls or Yamaha with 1 inch control area).

- Thickness: 1.50" in..

- Width: 36" in..

- Pullback (depth): 7" in..

- Rise (height): 16" in..

-Center Width: 11.5" in (measured from center of the bend to center of the bend).

- Grip sections taper to 1" diameter to be used with 1" hand controls and grips. .

- Bars are Pre-drilled for internal wiring..

- Handlebars are equipped for Throttle By Wire (Electronic Throttle).

Width - The length between the left and the right ends of the handlebar..

Rise (height) - The length from the base of the handlebar to the top..

Pullback (depth) - Viewing from the side, the distance from the front to the back end of the handlebar grips..

Thickness - the diameter of the handlebar..

Center Width - The width from center of bend to center of bend at the base of the bar, or for sharp cornered bars from outside of the corner to outside of corner. .

.

QUESTIONS 724 662 0581