MICRO SWITCH RELAY High or low beam, horn, ignition etc

MICRO SWITCH RELAY High or low beam, horn, ignition etc

The m.Relay is a very compact relay

High or low beam, horn, ignition etc. can be switched easily and almost lossless.

Higher current loads are put closer to the appliance (e.g. lights). Ignition lock and/or handlebar switch only have to bear a minimal pilot current load.

Failures and burned contact pins are a thing of the past!

Due to minimized conductor loss, e.g. beam brightness is significantly increased - additional safety!

A central threaded bore on the upper casing surface allows for easy mounting to any place, even if mounting multiple m.Relays. The m.Relay casing is turned from a solid aluminium block and anodized black. It is completely water-tight and vibration resistant.

Dimensions

Diameter 20mm (without cable), height 21.5mm

The m-Relay provides the following terminals/cables:

2 x red cable – switched contact

connect to your device/load (e.g. light)

2 x black cable – relay coil

connect to your switch or push button (e.g. horn)